The form is made of silicone on a tin basis, working temperature of a form from-40C to +80C.
All molds are cast by me by hand, therefore deviations in thickness and distance are possible, do not affect the imprint of the mold. I use professional degassing equipment to completely eliminate the slightest chance of form defects.
In most cases, mold lubrication is not required, although I recommend using a wax-based lubricant to make your molds last as long as possible, especially if you are using epoxy.
The life cycle of a silicone mold when working with epoxy resin is about 25 uses (depending on the aggressiveness of the resin). When working with other, non-aggressive materials, such as clay, the life cycle of the mold is almost endless))
