Wooden business card holder [Okapi] walnut

■ It is a wooden business card holder made by laser cutting and hand finishing. It has a mechanism that allows it to be opened from the side like a Zippo lighter. (Since it has a structure that locks firmly, it will not come off from you) Animal series This time, a rare beast, Okapi I carve one step in the base business card holder and embed different wood in it. In addition, there is almost no misalignment between the lid and the grain with a laser-cut 0.2 mm cutting width. Therefore, the beauty of the wood grain is natural and the seams are natural! !! Walnut is used for the plate material. Embedding materials include red wood, citan, Hawaiian mango, and wenge. The size is approximately 68 mm x 105 mm x thickness 12 to 13 mm The finish is safe to lick, Osmo color natural oil finish. (Has a simple water repellent effect) A normal business card can hold around 20 cards. [Kodawari Point 1] Adhesion of front and back plates is inside to improve accuracy and strength 18 bamboo shafts are placed inside (not visible from the outside) [Kodawari Point 2] We devised the internal structure so that the business card would not get dirty, and let the corners escape. We have devised so that the business card can only be touched to the minimum. [Kodawari Point 3] "Click!" On the lock part. I am particular about the feeling and ease of opening. [Kodawari Point 4] The wood name is engraved on the inside! !! Free simple wrapping! !! * Since the photo is for shooting, the grain and color of the delivered product may differ slightly. Please note that. * The combination of parquet is also different from the photo. If it is in stock, it can be shipped immediately, but if it is out of stock, it is made to order. It will take 3 to 5 days to ship. Origin / Production method Saga Japan / Handmade